{
  "$type": "at.atmosynth.module",
  "descriptionVersion": 1,
  "moduleId": "instrument-keys",
  "versionKey": "3",
  "name": "Keys",
  "description": "An electric-piano-like voice: a triangle leaning towards a sawtooth and a triangle an octave above, struck in step through a Juno's kind of filter that is brighter the harder a key is struck. Quick to speak and quick to fade. Filter contour is how far, in cents, the filter's own contour opens it, Filter decay and Filter sustain that contour's shape, and Emphasis how far the filter rings, singing past one.",
  "audioInputs": [
    {
      "id": "in",
      "label": "In"
    }
  ],
  "audioOutputs": [
    {
      "id": "out",
      "label": "Out"
    }
  ],
  "midiInputs": [
    {
      "id": "midi",
      "label": "Note"
    }
  ],
  "nodes": [
    {
      "id": "note",
      "kind": "midiInput",
      "options": {
        "midiInput": "midi"
      }
    },
    {
      "id": "vel",
      "kind": "midiInput",
      "options": {
        "midiInput": "midi",
        "signal": "velocity"
      }
    },
    {
      "id": "in",
      "kind": "moduleInput",
      "options": {
        "input": "in"
      }
    },
    {
      "id": "one",
      "kind": "constantSource",
      "options": {}
    },
    {
      "id": "sum",
      "kind": "gain",
      "options": {}
    },
    {
      "id": "sumset",
      "kind": "waveShaper",
      "options": {
        "curve": [
          "0.9375",
          "-0.9375"
        ]
      }
    },
    {
      "id": "osc1",
      "kind": "dsp",
      "options": {
        "code": "// The oscillator of an analog monosynth, as one module: a wave that morphs\n// from a triangle through a sawtooth and a square to a narrow pulse, a sub\n// oscillator locked to it, a phase that does not start where the last note's\n// did, and a pitch that never quite sits still. The vocabulary's own\n// `oscillator` reaches none of the four. It has no phase anything can read,\n// so nothing can count its cycles to divide them into a sub; nothing can tell\n// it where to start, and every voice built for a note starts it at nothing;\n// nothing can start it over, so it cannot be synced; and its waves are four\n// fixed shapes, so a knob between them is a crossfade of four oscillators\n// that only sound like one while they stay in step.\n//\n// **Wave** travels triangle, sawtooth, square at nought to two, each pair\n// mixed sample for sample between, and from two to three the square narrows\n// from a half of the cycle to a tenth of it rather than fading into anything.\n// A tenth because the pulse loses its fundamental fast below it — its level\n// falls with the sine of the width times pi, a third of the square's at a\n// tenth and a sixth at a twentieth — and because its two edges must stay\n// further apart than the two samples each one's correction spans, which at a\n// tenth they do up to C7 and at a twentieth only up to C6. A pulse spends more\n// of its cycle low than high, so it sits off centre by that much; the offset\n// is taken off as the width moves, rather than by a filter after it, so a\n// narrow pulse starts a note centred instead of thumping into place.\n//\n// Every wave starts where the platform's other oscillators start theirs: the\n// triangle and the sawtooth at nothing on their way up, the square at the\n// start of its high half. So **Phase** at reset starts every note exactly as\n// an `oscillator` would, and free starts each one somewhere else in its\n// cycle, drawn from the module's generator — which is what an analog\n// oscillator does, since it never stopped running between notes. Two notes in\n// a row, or two of these detuned against each other, then never start their\n// attack the same way twice.\n//\n// **The sub** is a square one octave or two below, and is the main phase\n// divided rather than an oscillator of its own: it changes sides every time\n// the main phase comes round, or every second time, so it cannot drift\n// against it. It has an output of its own, at full level whatever the mix is,\n// and the module mixes it into Out through a gain outside this code.\n//\n// **Drift** is a slow wander of the pitch, in cents: a new target from the\n// dice every three tenths of a second, approached through a one-pole with the\n// same time constant, worked out every 32 samples rather than every one,\n// since nothing that slow needs more. It is the instability that makes two\n// analog oscillators beat against each other, and at nothing it is gone.\n//\n// **Sync** takes the phase back to its start on the rising zero crossings of\n// whatever is patched there, as the sync oscillator's Sync input does, a\n// sample late and never a fraction of one jittery. While it is driving, the\n// pitch heard is the thing driving it, so that is what the sub divides; when\n// it lets go, the sub divides the main phase's own turns again.\n//\n// Every discontinuity is corrected where it falls between two samples: a\n// polyBLEP scaled by however far the wave jumped for the sawtooth's fall, the\n// pulse's two edges, the sub's edges and a reset, and that residual\n// integrated once — a polyBLAMP — for the triangle's corners. The output\n// leaves through a one-pole at 5 Hz, as the sync oscillator's does and for\n// its reason: a wave cut off mid-cycle no longer sits either side of nothing.\nimport { AtmoProcessor, Rng } from \"atmosynth:dsp\";\n\n/** The narrowest the pulse gets, as a fraction of the cycle spent high. */\nconst NARROWEST = 0.1;\n/** Samples between two steps of the drift. */\nconst DRIFT_TICK = 32;\n/** Seconds between two of its targets, and its time constant. */\nconst DRIFT_SECONDS = 0.3;\n\n/** No more than a wave a sample, and never backwards; nothing at all where it is not finite. */\nfunction limit(step) {\n  return !(step - step === 0) ? 0 : step > 0.49 ? 0.49 : step < 0 ? 0 : step;\n}\n\nexport default class AtmosynthAnalog extends AtmoProcessor {\n  static spec = 1;\n  static inputs = [];\n  // Out, then the sub on its own.\n  static outputs = [1, 1];\n  // Not smoothed here: a knob's move reaches these already eased, and the\n  // note and the inputs wired in are followed exactly.\n  static params = {\n    // The note, in hertz, off the module's MIDI input.\n    frequency: { min: 0, max: 24000, default: 0, rate: \"a\", smooth: 0 },\n    // The knob and whatever is patched into Detune, together.\n    detune: { min: -9600, max: 9600, default: 0, rate: \"a\", smooth: 0 },\n    // 0 triangle, 1 sawtooth, 2 square, 3 narrow pulse, and every place between.\n    wave: { min: 0, max: 3, default: 1, rate: \"a\", smooth: 0 },\n    // Whatever is patched into Sync. Silence never crosses, so an input with\n    // nothing in it starts nothing over.\n    reset: { min: -1000, max: 1000, default: 0, rate: \"a\", smooth: 0 },\n    // How far the pitch wanders, in cents.\n    drift: { min: 0, max: 15, default: 3, rate: \"a\", smooth: 0 },\n    // 0 one octave down, 1 two.\n    octave: { min: 0, max: 1, default: 0, rate: \"k\", smooth: 0 },\n    // 0 free, 1 reset. Read once, when the note begins.\n    phase: { min: 0, max: 1, default: 0, rate: \"k\", smooth: 0 },\n  };\n\n  constructor() {\n    super();\n    // Where a free note starts and the drift's targets. Nothing is drawn\n    // until the first call, which is when the note begins.\n    this.rng = new Rng(this.seed);\n    this.phase = 0;\n    /** The main phase's turns, counted round four: the sub is read off it. */\n    this.count = 0;\n    /** Whether the first block has drawn where this note starts. */\n    this.begun = false;\n    /** The Detune the ratio was last worked out for. */\n    this.cents = 0;\n    this.ratio = 1;\n    /** What the Wave knob was last worked out for (not a number until it has\n     *  been, so the first sample works it out), and what it came to. */\n    this.wave = 0 / 0;\n    this.tri = 0;\n    this.saw = 1;\n    this.pulse = 0;\n    this.width = 0.5;\n    this.offset = 0;\n    this.start = 0;\n    /** The Sync input as it was a sample ago, and samples it still drives for. */\n    this.lastLevel = 0;\n    this.external = 0;\n    /** Band-limiting owed to this sample and the next, for each output. */\n    this.owed = 0;\n    this.carry = 0;\n    this.subOwed = 0;\n    this.subCarry = 0;\n    /** The 5 Hz one-pole on the way out, and the two samples it remembers. */\n    this.pole = 1 - (2 * Math.PI * 5) / sampleRate;\n    this.lastRaw = 0;\n    this.centred = 0;\n    /** The drift: samples to its next step and to its next target, where it is\n     *  heading, where it has got to, and the ratio that comes to. */\n    this.tick = 0;\n    this.every = DRIFT_SECONDS * sampleRate;\n    this.wait = this.every;\n    this.glide = 1 - Math.exp(-DRIFT_TICK / this.every);\n    this.target = 0;\n    this.wander = 0;\n    this.drifted = 1;\n  }\n\n  /** The Wave knob's travel, as weights on three waves and a pulse's width. */\n  shape(position) {\n    const place = position < 0 ? 0 : position > 3 ? 3 : position;\n    this.tri = place < 1 ? 1 - place : 0;\n    this.saw = place < 1 ? place : place < 2 ? 2 - place : 0;\n    this.pulse = place < 1 ? 0 : place < 2 ? place - 1 : 1;\n    this.width = place < 2 ? 0.5 : 0.5 - (place - 2) * (0.5 - NARROWEST);\n    // A pulse high for a fraction w of its cycle sits 2w − 1 off centre.\n    this.offset = this.pulse * (2 * this.width - 1);\n    this.start = this.level(0);\n  }\n\n  /** The wave at a phase, before any band-limiting. */\n  level(phase) {\n    let value = 0;\n    if (this.tri !== 0) {\n      const turned = phase < 0.75 ? phase + 0.25 : phase - 0.75;\n      value = this.tri * (1 - 4 * Math.abs(turned - 0.5));\n    }\n    if (this.saw !== 0) value += this.saw * (phase < 0.5 ? 2 * phase : 2 * phase - 2);\n    if (this.pulse !== 0) value += this.pulse * (phase < this.width ? 1 : -1) - this.offset;\n    return value;\n  }\n\n  /** A band-limited step of `height`, `when` samples after this instant. */\n  jump(height, when) {\n    const half = height / 2;\n    this.owed += half * (1 - when) * (1 - when);\n    this.carry -= half * when * when;\n  }\n\n  /** The same for the sub's own output. */\n  subJump(height, when) {\n    const half = height / 2;\n    this.subOwed += half * (1 - when) * (1 - when);\n    this.subCarry -= half * when * when;\n  }\n\n  /** A band-limited corner: the slope changes by `change` a sample. */\n  bend(change, when) {\n    const sixth = change / 6;\n    this.owed += sixth * (1 - when) * (1 - when) * (1 - when);\n    this.carry += sixth * when * when * when;\n  }\n\n  /** One more turn for the sub to divide, `when` samples after this instant. */\n  turn(mask, when) {\n    const before = (this.count & mask) !== 0 ? -1 : 1;\n    this.count = (this.count + 1) & 3;\n    const after = (this.count & mask) !== 0 ? -1 : 1;\n    if (after !== before) this.subJump(after - before, when);\n  }\n\n  process(inputs, outputs, params) {\n    const channel = outputs[0][0];\n    const below = outputs[1][0];\n    const frequency = params.frequency;\n    const detune = params.detune;\n    const wave = params.wave;\n    const reset = params.reset;\n    const drift = params.drift;\n    const mask = params.octave[0] < 0.5 ? 1 : 2;\n    const rate = sampleRate;\n\n    if (!this.begun) {\n      this.begun = true;\n      if (params.phase[0] < 0.5) {\n        this.phase = this.rng.uniform();\n        this.count = Math.floor(this.rng.uniform() * 4);\n        this.wander = this.rng.bipolar();\n      }\n      this.target = this.rng.bipolar();\n    }\n\n    for (let index = 0; index < channel.length; index += 1) {\n      const position = wave[index];\n      if (!(position === this.wave)) {\n        this.shape(position);\n        this.wave = position;\n      }\n      const cents = detune[index];\n      if (cents !== this.cents) {\n        this.cents = cents;\n        this.ratio = Math.pow(2, cents / 1200);\n      }\n      if (this.tick === 0) {\n        this.tick = DRIFT_TICK;\n        this.wait -= DRIFT_TICK;\n        if (this.wait <= 0) {\n          this.wait += this.every;\n          this.target = this.rng.bipolar();\n        }\n        this.wander += (this.target - this.wander) * this.glide;\n        this.drifted = Math.pow(2, (drift[index] * this.wander) / 1200);\n      }\n      this.tick -= 1;\n      const step = limit((frequency[index] * this.ratio * this.drifted) / rate);\n\n      // The Sync input's rising zero crossings, placed the same fraction into\n      // this sample as they fell into the last.\n      let syncAt = -1;\n      const level = reset[index];\n      if (this.lastLevel < 0 && level >= 0) {\n        syncAt = -this.lastLevel / (level - this.lastLevel);\n        if (syncAt >= 1) syncAt = 0.999999;\n        this.external = rate | 0;\n      }\n      this.lastLevel = level;\n      const driven = this.external > 0;\n      if (driven) this.external -= 1;\n\n      // What the last sample's discontinuities left for this one.\n      this.owed = this.carry;\n      this.carry = 0;\n      this.subOwed = this.subCarry;\n      this.subCarry = 0;\n\n      // Both outputs at this instant, before the interval to the next one is\n      // walked for everything that happens in it.\n      const value = this.level(this.phase);\n      const sub = (this.count & mask) !== 0 ? -1 : 1;\n\n      const tri = this.tri;\n      const saw = this.saw;\n      const pulse = this.pulse;\n      const width = this.width;\n      let phase = this.phase;\n      let where = 0;\n      for (let guard = 0; guard < 8; guard += 1) {\n        let boundary = 1;\n        if (tri !== 0) {\n          if (phase < 0.25) boundary = 0.25;\n          else if (phase < 0.75) boundary = 0.75;\n        }\n        if (saw !== 0 && phase < 0.5 && 0.5 < boundary) boundary = 0.5;\n        if (pulse !== 0 && phase < width && width < boundary) boundary = width;\n        let when = step > 0 ? where + (boundary - phase) / step : 2;\n        if (when < where) when = where;\n\n        if (syncAt >= where && syncAt <= when) {\n          // Back to the start, from wherever the wave had got to, and the\n          // triangle's slope with it where it was on its way down.\n          phase += (syncAt - where) * step;\n          where = syncAt;\n          syncAt = -1;\n          this.jump(this.start - this.level(phase), where);\n          if (tri !== 0 && phase >= 0.25 && phase < 0.75) this.bend(8 * tri * step, where);\n          phase = 0;\n          this.turn(mask, where);\n          continue;\n        }\n        if (when > 1) break;\n\n        where = when;\n        phase = boundary;\n        if (tri !== 0) {\n          if (boundary === 0.25) this.bend(-8 * tri * step, where);\n          else if (boundary === 0.75) this.bend(8 * tri * step, where);\n        }\n        if (saw !== 0 && boundary === 0.5) this.jump(-2 * saw, where);\n        if (pulse !== 0 && boundary === width) this.jump(-2 * pulse, where);\n        if (boundary === 1) {\n          if (pulse !== 0) this.jump(2 * pulse, where);\n          phase = 0;\n          if (!driven) this.turn(mask, where);\n        }\n      }\n      this.phase = phase + (1 - where) * step;\n\n      const raw = value + this.owed;\n      this.centred = raw - this.lastRaw + this.pole * this.centred;\n      this.lastRaw = raw;\n      channel[index] = this.centred;\n      below[index] = sub + this.subOwed;\n    }\n    return true;\n  }\n}\n"
      }
    },
    {
      "id": "osc1Waveset",
      "kind": "waveShaper",
      "options": {
        "curve": [
          "0.6",
          "-0.6"
        ]
      }
    },
    {
      "id": "osc1Phaseset",
      "kind": "waveShaper",
      "options": {
        "curve": [
          -1,
          1
        ]
      }
    },
    {
      "id": "osc2",
      "kind": "dsp",
      "options": {
        "code": "// The oscillator of an analog monosynth, as one module: a wave that morphs\n// from a triangle through a sawtooth and a square to a narrow pulse, a sub\n// oscillator locked to it, a phase that does not start where the last note's\n// did, and a pitch that never quite sits still. The vocabulary's own\n// `oscillator` reaches none of the four. It has no phase anything can read,\n// so nothing can count its cycles to divide them into a sub; nothing can tell\n// it where to start, and every voice built for a note starts it at nothing;\n// nothing can start it over, so it cannot be synced; and its waves are four\n// fixed shapes, so a knob between them is a crossfade of four oscillators\n// that only sound like one while they stay in step.\n//\n// **Wave** travels triangle, sawtooth, square at nought to two, each pair\n// mixed sample for sample between, and from two to three the square narrows\n// from a half of the cycle to a tenth of it rather than fading into anything.\n// A tenth because the pulse loses its fundamental fast below it — its level\n// falls with the sine of the width times pi, a third of the square's at a\n// tenth and a sixth at a twentieth — and because its two edges must stay\n// further apart than the two samples each one's correction spans, which at a\n// tenth they do up to C7 and at a twentieth only up to C6. A pulse spends more\n// of its cycle low than high, so it sits off centre by that much; the offset\n// is taken off as the width moves, rather than by a filter after it, so a\n// narrow pulse starts a note centred instead of thumping into place.\n//\n// Every wave starts where the platform's other oscillators start theirs: the\n// triangle and the sawtooth at nothing on their way up, the square at the\n// start of its high half. So **Phase** at reset starts every note exactly as\n// an `oscillator` would, and free starts each one somewhere else in its\n// cycle, drawn from the module's generator — which is what an analog\n// oscillator does, since it never stopped running between notes. Two notes in\n// a row, or two of these detuned against each other, then never start their\n// attack the same way twice.\n//\n// **The sub** is a square one octave or two below, and is the main phase\n// divided rather than an oscillator of its own: it changes sides every time\n// the main phase comes round, or every second time, so it cannot drift\n// against it. It has an output of its own, at full level whatever the mix is,\n// and the module mixes it into Out through a gain outside this code.\n//\n// **Drift** is a slow wander of the pitch, in cents: a new target from the\n// dice every three tenths of a second, approached through a one-pole with the\n// same time constant, worked out every 32 samples rather than every one,\n// since nothing that slow needs more. It is the instability that makes two\n// analog oscillators beat against each other, and at nothing it is gone.\n//\n// **Sync** takes the phase back to its start on the rising zero crossings of\n// whatever is patched there, as the sync oscillator's Sync input does, a\n// sample late and never a fraction of one jittery. While it is driving, the\n// pitch heard is the thing driving it, so that is what the sub divides; when\n// it lets go, the sub divides the main phase's own turns again.\n//\n// Every discontinuity is corrected where it falls between two samples: a\n// polyBLEP scaled by however far the wave jumped for the sawtooth's fall, the\n// pulse's two edges, the sub's edges and a reset, and that residual\n// integrated once — a polyBLAMP — for the triangle's corners. The output\n// leaves through a one-pole at 5 Hz, as the sync oscillator's does and for\n// its reason: a wave cut off mid-cycle no longer sits either side of nothing.\nimport { AtmoProcessor, Rng } from \"atmosynth:dsp\";\n\n/** The narrowest the pulse gets, as a fraction of the cycle spent high. */\nconst NARROWEST = 0.1;\n/** Samples between two steps of the drift. */\nconst DRIFT_TICK = 32;\n/** Seconds between two of its targets, and its time constant. */\nconst DRIFT_SECONDS = 0.3;\n\n/** No more than a wave a sample, and never backwards; nothing at all where it is not finite. */\nfunction limit(step) {\n  return !(step - step === 0) ? 0 : step > 0.49 ? 0.49 : step < 0 ? 0 : step;\n}\n\nexport default class AtmosynthAnalog extends AtmoProcessor {\n  static spec = 1;\n  static inputs = [];\n  // Out, then the sub on its own.\n  static outputs = [1, 1];\n  // Not smoothed here: a knob's move reaches these already eased, and the\n  // note and the inputs wired in are followed exactly.\n  static params = {\n    // The note, in hertz, off the module's MIDI input.\n    frequency: { min: 0, max: 24000, default: 0, rate: \"a\", smooth: 0 },\n    // The knob and whatever is patched into Detune, together.\n    detune: { min: -9600, max: 9600, default: 0, rate: \"a\", smooth: 0 },\n    // 0 triangle, 1 sawtooth, 2 square, 3 narrow pulse, and every place between.\n    wave: { min: 0, max: 3, default: 1, rate: \"a\", smooth: 0 },\n    // Whatever is patched into Sync. Silence never crosses, so an input with\n    // nothing in it starts nothing over.\n    reset: { min: -1000, max: 1000, default: 0, rate: \"a\", smooth: 0 },\n    // How far the pitch wanders, in cents.\n    drift: { min: 0, max: 15, default: 3, rate: \"a\", smooth: 0 },\n    // 0 one octave down, 1 two.\n    octave: { min: 0, max: 1, default: 0, rate: \"k\", smooth: 0 },\n    // 0 free, 1 reset. Read once, when the note begins.\n    phase: { min: 0, max: 1, default: 0, rate: \"k\", smooth: 0 },\n  };\n\n  constructor() {\n    super();\n    // Where a free note starts and the drift's targets. Nothing is drawn\n    // until the first call, which is when the note begins.\n    this.rng = new Rng(this.seed);\n    this.phase = 0;\n    /** The main phase's turns, counted round four: the sub is read off it. */\n    this.count = 0;\n    /** Whether the first block has drawn where this note starts. */\n    this.begun = false;\n    /** The Detune the ratio was last worked out for. */\n    this.cents = 0;\n    this.ratio = 1;\n    /** What the Wave knob was last worked out for (not a number until it has\n     *  been, so the first sample works it out), and what it came to. */\n    this.wave = 0 / 0;\n    this.tri = 0;\n    this.saw = 1;\n    this.pulse = 0;\n    this.width = 0.5;\n    this.offset = 0;\n    this.start = 0;\n    /** The Sync input as it was a sample ago, and samples it still drives for. */\n    this.lastLevel = 0;\n    this.external = 0;\n    /** Band-limiting owed to this sample and the next, for each output. */\n    this.owed = 0;\n    this.carry = 0;\n    this.subOwed = 0;\n    this.subCarry = 0;\n    /** The 5 Hz one-pole on the way out, and the two samples it remembers. */\n    this.pole = 1 - (2 * Math.PI * 5) / sampleRate;\n    this.lastRaw = 0;\n    this.centred = 0;\n    /** The drift: samples to its next step and to its next target, where it is\n     *  heading, where it has got to, and the ratio that comes to. */\n    this.tick = 0;\n    this.every = DRIFT_SECONDS * sampleRate;\n    this.wait = this.every;\n    this.glide = 1 - Math.exp(-DRIFT_TICK / this.every);\n    this.target = 0;\n    this.wander = 0;\n    this.drifted = 1;\n  }\n\n  /** The Wave knob's travel, as weights on three waves and a pulse's width. */\n  shape(position) {\n    const place = position < 0 ? 0 : position > 3 ? 3 : position;\n    this.tri = place < 1 ? 1 - place : 0;\n    this.saw = place < 1 ? place : place < 2 ? 2 - place : 0;\n    this.pulse = place < 1 ? 0 : place < 2 ? place - 1 : 1;\n    this.width = place < 2 ? 0.5 : 0.5 - (place - 2) * (0.5 - NARROWEST);\n    // A pulse high for a fraction w of its cycle sits 2w − 1 off centre.\n    this.offset = this.pulse * (2 * this.width - 1);\n    this.start = this.level(0);\n  }\n\n  /** The wave at a phase, before any band-limiting. */\n  level(phase) {\n    let value = 0;\n    if (this.tri !== 0) {\n      const turned = phase < 0.75 ? phase + 0.25 : phase - 0.75;\n      value = this.tri * (1 - 4 * Math.abs(turned - 0.5));\n    }\n    if (this.saw !== 0) value += this.saw * (phase < 0.5 ? 2 * phase : 2 * phase - 2);\n    if (this.pulse !== 0) value += this.pulse * (phase < this.width ? 1 : -1) - this.offset;\n    return value;\n  }\n\n  /** A band-limited step of `height`, `when` samples after this instant. */\n  jump(height, when) {\n    const half = height / 2;\n    this.owed += half * (1 - when) * (1 - when);\n    this.carry -= half * when * when;\n  }\n\n  /** The same for the sub's own output. */\n  subJump(height, when) {\n    const half = height / 2;\n    this.subOwed += half * (1 - when) * (1 - when);\n    this.subCarry -= half * when * when;\n  }\n\n  /** A band-limited corner: the slope changes by `change` a sample. */\n  bend(change, when) {\n    const sixth = change / 6;\n    this.owed += sixth * (1 - when) * (1 - when) * (1 - when);\n    this.carry += sixth * when * when * when;\n  }\n\n  /** One more turn for the sub to divide, `when` samples after this instant. */\n  turn(mask, when) {\n    const before = (this.count & mask) !== 0 ? -1 : 1;\n    this.count = (this.count + 1) & 3;\n    const after = (this.count & mask) !== 0 ? -1 : 1;\n    if (after !== before) this.subJump(after - before, when);\n  }\n\n  process(inputs, outputs, params) {\n    const channel = outputs[0][0];\n    const below = outputs[1][0];\n    const frequency = params.frequency;\n    const detune = params.detune;\n    const wave = params.wave;\n    const reset = params.reset;\n    const drift = params.drift;\n    const mask = params.octave[0] < 0.5 ? 1 : 2;\n    const rate = sampleRate;\n\n    if (!this.begun) {\n      this.begun = true;\n      if (params.phase[0] < 0.5) {\n        this.phase = this.rng.uniform();\n        this.count = Math.floor(this.rng.uniform() * 4);\n        this.wander = this.rng.bipolar();\n      }\n      this.target = this.rng.bipolar();\n    }\n\n    for (let index = 0; index < channel.length; index += 1) {\n      const position = wave[index];\n      if (!(position === this.wave)) {\n        this.shape(position);\n        this.wave = position;\n      }\n      const cents = detune[index];\n      if (cents !== this.cents) {\n        this.cents = cents;\n        this.ratio = Math.pow(2, cents / 1200);\n      }\n      if (this.tick === 0) {\n        this.tick = DRIFT_TICK;\n        this.wait -= DRIFT_TICK;\n        if (this.wait <= 0) {\n          this.wait += this.every;\n          this.target = this.rng.bipolar();\n        }\n        this.wander += (this.target - this.wander) * this.glide;\n        this.drifted = Math.pow(2, (drift[index] * this.wander) / 1200);\n      }\n      this.tick -= 1;\n      const step = limit((frequency[index] * this.ratio * this.drifted) / rate);\n\n      // The Sync input's rising zero crossings, placed the same fraction into\n      // this sample as they fell into the last.\n      let syncAt = -1;\n      const level = reset[index];\n      if (this.lastLevel < 0 && level >= 0) {\n        syncAt = -this.lastLevel / (level - this.lastLevel);\n        if (syncAt >= 1) syncAt = 0.999999;\n        this.external = rate | 0;\n      }\n      this.lastLevel = level;\n      const driven = this.external > 0;\n      if (driven) this.external -= 1;\n\n      // What the last sample's discontinuities left for this one.\n      this.owed = this.carry;\n      this.carry = 0;\n      this.subOwed = this.subCarry;\n      this.subCarry = 0;\n\n      // Both outputs at this instant, before the interval to the next one is\n      // walked for everything that happens in it.\n      const value = this.level(this.phase);\n      const sub = (this.count & mask) !== 0 ? -1 : 1;\n\n      const tri = this.tri;\n      const saw = this.saw;\n      const pulse = this.pulse;\n      const width = this.width;\n      let phase = this.phase;\n      let where = 0;\n      for (let guard = 0; guard < 8; guard += 1) {\n        let boundary = 1;\n        if (tri !== 0) {\n          if (phase < 0.25) boundary = 0.25;\n          else if (phase < 0.75) boundary = 0.75;\n        }\n        if (saw !== 0 && phase < 0.5 && 0.5 < boundary) boundary = 0.5;\n        if (pulse !== 0 && phase < width && width < boundary) boundary = width;\n        let when = step > 0 ? where + (boundary - phase) / step : 2;\n        if (when < where) when = where;\n\n        if (syncAt >= where && syncAt <= when) {\n          // Back to the start, from wherever the wave had got to, and the\n          // triangle's slope with it where it was on its way down.\n          phase += (syncAt - where) * step;\n          where = syncAt;\n          syncAt = -1;\n          this.jump(this.start - this.level(phase), where);\n          if (tri !== 0 && phase >= 0.25 && phase < 0.75) this.bend(8 * tri * step, where);\n          phase = 0;\n          this.turn(mask, where);\n          continue;\n        }\n        if (when > 1) break;\n\n        where = when;\n        phase = boundary;\n        if (tri !== 0) {\n          if (boundary === 0.25) this.bend(-8 * tri * step, where);\n          else if (boundary === 0.75) this.bend(8 * tri * step, where);\n        }\n        if (saw !== 0 && boundary === 0.5) this.jump(-2 * saw, where);\n        if (pulse !== 0 && boundary === width) this.jump(-2 * pulse, where);\n        if (boundary === 1) {\n          if (pulse !== 0) this.jump(2 * pulse, where);\n          phase = 0;\n          if (!driven) this.turn(mask, where);\n        }\n      }\n      this.phase = phase + (1 - where) * step;\n\n      const raw = value + this.owed;\n      this.centred = raw - this.lastRaw + this.pole * this.centred;\n      this.lastRaw = raw;\n      channel[index] = this.centred;\n      below[index] = sub + this.subOwed;\n    }\n    return true;\n  }\n}\n"
      }
    },
    {
      "id": "osc2level",
      "kind": "gain",
      "options": {}
    },
    {
      "id": "osc2Waveset",
      "kind": "waveShaper",
      "options": {
        "curve": [
          1,
          -1
        ]
      }
    },
    {
      "id": "osc2Phaseset",
      "kind": "waveShaper",
      "options": {
        "curve": [
          -1,
          1
        ]
      }
    },
    {
      "id": "osc2levelGainset",
      "kind": "waveShaper",
      "options": {
        "curve": [
          "0.3",
          "-0.3"
        ]
      }
    },
    {
      "id": "shaper",
      "kind": "waveShaper",
      "options": {
        "curve": [
          "-2.3498582",
          "-2.3498582",
          "-2.3498581",
          "-2.3498581",
          "-2.3498581",
          "-2.3498581",
          "-2.3498581",
          "-2.349858",
          "-2.349858",
          "-2.349858",
          "-2.349858",
          "-2.3498579",
          "-2.3498579",
          "-2.3498579",
          "-2.3498578",
          "-2.3498578",
          "-2.3498578",
          "-2.3498578",
          "-2.3498577",
          "-2.3498577",
          "-2.3498576",
          "-2.3498576",
          "-2.3498576",
          "-2.3498575",
          "-2.3498575",
          "-2.3498575",
          "-2.3498574",
          "-2.3498574",
          "-2.3498573",
          "-2.3498573",
          "-2.3498572",
          "-2.3498572",
          "-2.3498571",
          "-2.3498571",
          "-2.349857",
          "-2.349857",
          "-2.3498569",
          "-2.3498568",
          "-2.3498568",
          "-2.3498567",
          "-2.3498566",
          "-2.3498566",
          "-2.3498565",
          "-2.3498564",
          "-2.3498563",
          "-2.3498563",
          "-2.3498562",
          "-2.3498561",
          "-2.349856",
          "-2.3498559",
          "-2.3498558",
          "-2.3498557",
          "-2.3498557",
          "-2.3498556",
          "-2.3498554",
          "-2.3498553",
          "-2.3498552",
          "-2.3498551",
          "-2.349855",
          "-2.3498549",
          "-2.3498548",
          "-2.3498546",
          "-2.3498545",
          "-2.3498544",
          "-2.3498542",
          "-2.3498541",
          "-2.3498539",
          "-2.3498538",
          "-2.3498536",
          "-2.3498534",
          "-2.3498533",
          "-2.3498531",
          "-2.3498529",
          "-2.3498527",
          "-2.3498525",
          "-2.3498523",
          "-2.3498521",
          "-2.3498519",
          "-2.3498517",
          "-2.3498515",
          "-2.3498512",
          "-2.349851",
          "-2.3498507",
          "-2.3498505",
          "-2.3498502",
          "-2.34985",
          "-2.3498497",
          "-2.3498494",
          "-2.3498491",
          "-2.3498488",
          "-2.3498485",
          "-2.3498481",
          "-2.3498478",
          "-2.3498474",
          "-2.3498471",
          "-2.3498467",
          "-2.3498463",
          "-2.3498459",
          "-2.3498455",
          "-2.3498451",
          "-2.3498447",
          "-2.3498442",
          "-2.3498438",
          "-2.3498433",
          "-2.3498428",
          "-2.3498423",
          "-2.3498417",
          "-2.3498412",
          "-2.3498406",
          "-2.3498401",
          "-2.3498395",
          "-2.3498389",
          "-2.3498382",
          "-2.3498376",
          "-2.3498369",
          "-2.3498362",
          "-2.3498355",
          "-2.3498347",
          "-2.349834",
          "-2.3498332",
          "-2.3498324",
          "-2.3498315",
          "-2.3498307",
          "-2.3498298",
          "-2.3498289",
          "-2.3498279",
          "-2.3498269",
          "-2.3498259",
          "-2.3498249",
          "-2.3498238",
          "-2.3498227",
          "-2.3498215",
          "-2.3498204",
          "-2.3498191",
          "-2.3498179",
          "-2.3498166",
          "-2.3498152",
          "-2.3498139",
          "-2.3498124",
          "-2.349811",
          "-2.3498094",
          "-2.3498079",
          "-2.3498063",
          "-2.3498046",
          "-2.3498029",
          "-2.3498011",
          "-2.3497993",
          "-2.3497974",
          "-2.3497954",
          "-2.3497934",
          "-2.3497913",
          "-2.3497892",
          "-2.349787",
          "-2.3497847",
          "-2.3497824",
          "-2.3497799",
          "-2.3497774",
          "-2.3497748",
          "-2.3497722",
          "-2.3497694",
          "-2.3497666",
          "-2.3497637",
          "-2.3497606",
          "-2.3497575",
          "-2.3497543",
          "-2.349751",
          "-2.3497476",
          "-2.349744",
          "-2.3497404",
          "-2.3497366",
          "-2.3497328",
          "-2.3497288",
          "-2.3497246",
          "-2.3497204",
          "-2.349716",
          "-2.3497114",
          "-2.3497068",
          "-2.3497019",
          "-2.349697",
          "-2.3496918",
          "-2.3496865",
          "-2.349681",
          "-2.3496754",
          "-2.3496696",
          "-2.3496636",
          "-2.3496574",
          "-2.349651",
          "-2.3496444",
          "-2.3496376",
          "-2.3496306",
          "-2.3496233",
          "-2.3496158",
          "-2.3496081",
          "-2.3496002",
          "-2.349592",
          "-2.3495835",
          "-2.3495748",
          "-2.3495657",
          "-2.3495564",
          "-2.3495468",
          "-2.3495369",
          "-2.3495267",
          "-2.3495162",
          "-2.3495053",
          "-2.3494941",
          "-2.3494825",
          "-2.3494706",
          "-2.3494582",
          "-2.3494455",
          "-2.3494324",
          "-2.3494189",
          "-2.3494049",
          "-2.3493905",
          "-2.3493756",
          "-2.3493603",
          "-2.3493445",
          "-2.3493282",
          "-2.3493113",
          "-2.3492939",
          "-2.349276",
          "-2.3492575",
          "-2.3492384",
          "-2.3492187",
          "-2.3491984",
          "-2.3491775",
          "-2.3491558",
          "-2.3491335",
          "-2.3491105",
          "-2.3490868",
          "-2.3490623",
          "-2.349037",
          "-2.3490109",
          "-2.348984",
          "-2.3489562",
          "-2.3489276",
          "-2.348898",
          "-2.3488675",
          "-2.3488361",
          "-2.3488036",
          "-2.3487701",
          "-2.3487356",
          "-2.3487",
          "-2.3486632",
          "-2.3486252",
          "-2.3485861",
          "-2.3485457",
          "-2.348504",
          "-2.348461",
          "-2.3484167",
          "-2.3483709",
          "-2.3483237",
          "-2.348275",
          "-2.3482248",
          "-2.3481729",
          "-2.3481194",
          "-2.3480642",
          "-2.3480073",
          "-2.3479485",
          "-2.3478879",
          "-2.3478254",
          "-2.3477609",
          "-2.3476943",
          "-2.3476256",
          "-2.3475548",
          "-2.3474817",
          "-2.3474063",
          "-2.3473285",
          "-2.3472482",
          "-2.3471654",
          "-2.34708",
          "-2.3469918",
          "-2.3469009",
          "-2.346807",
          "-2.3467102",
          "-2.3466104",
          "-2.3465073",
          "-2.3464011",
          "-2.3462914",
          "-2.3461782",
          "-2.3460615",
          "-2.3459411",
          "-2.3458169",
          "-2.3456887",
          "-2.3455564",
          "-2.34542",
          "-2.3452793",
          "-2.3451341",
          "-2.3449843",
          "-2.3448297",
          "-2.3446703",
          "-2.3445058",
          "-2.3443361",
          "-2.3441611",
          "-2.3439804",
          "-2.3437941",
          "-2.3436019",
          "-2.3434036",
          "-2.343199",
          "-2.342988",
          "-2.3427703",
          "-2.3425456",
          "-2.3423139",
          "-2.3420749",
          "-2.3418283",
          "-2.3415739",
          "-2.3413114",
          "-2.3410407",
          "-2.3407614",
          "-2.3404733",
          "-2.3401761",
          "-2.3398694",
          "-2.3395531",
          "-2.3392269",
          "-2.3388903",
          "-2.3385431",
          "-2.3381849",
          "-2.3378154",
          "-2.3374343",
          "-2.3370411",
          "-2.3366355",
          "-2.3362172",
          "-2.3357856",
          "-2.3353405",
          "-2.3348813",
          "-2.3344077",
          "-2.3339191",
          "-2.3334152",
          "-2.3328954",
          "-2.3323592",
          "-2.3318062",
          "-2.3312357",
          "-2.3306473",
          "-2.3300404",
          "-2.3294145",
          "-2.3287689",
          "-2.3281029",
          "-2.3274161",
          "-2.3267078",
          "-2.3259772",
          "-2.3252236",
          "-2.3244465",
          "-2.323645",
          "-2.3228184",
          "-2.3219659",
          "-2.3210867",
          "-2.32018",
          "-2.3192449",
          "-2.3182806",
          "-2.3172862",
          "-2.3162607",
          "-2.3152033",
          "-2.3141128",
          "-2.3129883",
          "-2.3118288",
          "-2.3106332",
          "-2.3094003",
          "-2.3081291",
          "-2.3068184",
          "-2.305467",
          "-2.3040736",
          "-2.302637",
          "-2.3011559",
          "-2.2996289",
          "-2.2980546",
          "-2.2964317",
          "-2.2947585",
          "-2.2930338",
          "-2.2912558",
          "-2.289423",
          "-2.2875338",
          "-2.2855865",
          "-2.2835793",
          "-2.2815105",
          "-2.2793783",
          "-2.2771808",
          "-2.274916",
          "-2.272582",
          "-2.2701767",
          "-2.2676982",
          "-2.2651441",
          "-2.2625124",
          "-2.2598008",
          "-2.2570069",
          "-2.2541284",
          "-2.251163",
          "-2.2481079",
          "-2.2449608",
          "-2.2417191",
          "-2.2383799",
          "-2.2349406",
          "-2.2313983",
          "-2.2277502",
          "-2.2239933",
          "-2.2201247",
          "-2.2161411",
          "-2.2120394",
          "-2.2078165",
          "-2.2034689",
          "-2.1989934",
          "-2.1943864",
          "-2.1896445",
          "-2.184764",
          "-2.1797413",
          "-2.1745725",
          "-2.169254",
          "-2.1637818",
          "-2.1581519",
          "-2.1523603",
          "-2.1464028",
          "-2.1402753",
          "-2.1339735",
          "-2.1274931",
          "-2.1208297",
          "-2.1139787",
          "-2.1069357",
          "-2.0996961",
          "-2.0922551",
          "-2.0846082",
          "-2.0767503",
          "-2.0686769",
          "-2.0603828",
          "-2.0518633",
          "-2.0431132",
          "-2.0341276",
          "-2.0249014",
          "-2.0154294",
          "-2.0057066",
          "-1.9957278",
          "-1.9854878",
          "-1.9749814",
          "-1.9642034",
          "-1.9531486",
          "-1.9418118",
          "-1.9301878",
          "-1.9182716",
          "-1.9060578",
          "-1.8935416",
          "-1.8807177",
          "-1.8675813",
          "-1.8541275",
          "-1.8403512",
          "-1.826248",
          "-1.811813",
          "-1.7970417",
          "-1.7819297",
          "-1.7664727",
          "-1.7506666",
          "-1.7345074",
          "-1.7179913",
          "-1.7011146",
          "-1.683874",
          "-1.6662662",
          "-1.6482882",
          "-1.6299373",
          "-1.611211",
          "-1.5921072",
          "-1.5726238",
          "-1.5527592",
          "-1.5325122",
          "-1.5118818",
          "-1.4908672",
          "-1.4694684",
          "-1.4476852",
          "-1.4255183",
          "-1.4029685",
          "-1.380037",
          "-1.3567256",
          "-1.3330365",
          "-1.3089722",
          "-1.2845357",
          "-1.2597307",
          "-1.234561",
          "-1.2090311",
          "-1.1831459",
          "-1.156911",
          "-1.1303322",
          "-1.1034159",
          "-1.0761691",
          "-1.0485992",
          "-1.020714",
          "-0.9925221",
          "-0.9640324",
          "-0.9352541",
          "-0.9061971",
          "-0.8768719",
          "-0.847289",
          "-0.8174599",
          "-0.7873961",
          "-0.7571097",
          "-0.7266131",
          "-0.6959193",
          "-0.6650413",
          "-0.6339928",
          "-0.6027877",
          "-0.57144",
          "-0.5399643",
          "-0.5083751",
          "-0.4766874",
          "-0.4449162",
          "-0.4130768",
          "-0.3811846",
          "-0.3492549",
          "-0.3173035",
          "-0.2853458",
          "-0.2533975",
          "-0.2214741",
          "-0.1895912",
          "-0.1577642",
          "-0.1260085",
          "-0.0943393",
          "-0.0627716",
          "-0.0313203",
          0,
          "0.0311749",
          "0.0621904",
          "0.0930326",
          "0.123688",
          "0.1541436",
          "0.1843865",
          "0.2144043",
          "0.2441851",
          "0.2737173",
          "0.3029897",
          "0.3319918",
          "0.3607131",
          "0.3891441",
          "0.4172753",
          "0.445098",
          "0.472604",
          "0.4997852",
          "0.5266346",
          "0.5531451",
          "0.5793105",
          "0.605125",
          "0.6305833",
          "0.6556804",
          "0.6804121",
          "0.7047743",
          "0.7287638",
          "0.7523776",
          "0.7756132",
          "0.7984684",
          "0.8209418",
          "0.843032",
          "0.8647383",
          "0.8860603",
          "0.906998",
          "0.9275517",
          "0.9477221",
          "0.9675103",
          "0.9869177",
          "1.0059458",
          "1.0245968",
          "1.0428729",
          "1.0607767",
          "1.0783108",
          "1.0954784",
          "1.1122827",
          "1.1287271",
          "1.1448154",
          "1.1605513",
          "1.175939",
          "1.1909825",
          "1.2056861",
          "1.2200544",
          "1.2340919",
          "1.2478033",
          "1.2611933",
          "1.2742668",
          "1.2870287",
          "1.299484",
          "1.3116379",
          "1.3234952",
          "1.3350614",
          "1.3463413",
          "1.3573403",
          "1.3680636",
          "1.3785163",
          "1.3887037",
          "1.3986309",
          "1.4083031",
          "1.4177255",
          "1.4269032",
          "1.4358413",
          "1.4445449",
          "1.4530189",
          "1.4612685",
          "1.4692984",
          "1.4771137",
          "1.4847191",
          "1.4921194",
          "1.4993193",
          "1.5063235",
          "1.5131366",
          "1.5197631",
          "1.5262074",
          "1.532474",
          "1.5385672",
          "1.5444911",
          "1.5502501",
          "1.5558481",
          "1.5612893",
          "1.5665776",
          "1.5717168",
          "1.5767108",
          "1.5815633",
          "1.5862779",
          "1.5908583",
          "1.595308",
          "1.5996303",
          "1.6038288",
          "1.6079065",
          "1.6118669",
          "1.615713",
          "1.6194479",
          "1.6230745",
          "1.626596",
          "1.630015",
          "1.6333345",
          "1.6365572",
          "1.6396856",
          "1.6427225",
          "1.6456704",
          "1.6485318",
          "1.651309",
          "1.6540045",
          "1.6566205",
          "1.6591593",
          "1.661623",
          "1.6640138",
          "1.6663338",
          "1.668585",
          "1.6707693",
          "1.6728887",
          "1.674945",
          "1.6769401",
          "1.6788757",
          "1.6807534",
          "1.6825751",
          "1.6843423",
          "1.6860567",
          "1.6877196",
          "1.6893327",
          "1.6908975",
          "1.6924152",
          "1.6938873",
          "1.6953151",
          "1.6967",
          "1.6980432",
          "1.6993459",
          "1.7006093",
          "1.7018347",
          "1.703023",
          "1.7041754",
          "1.705293",
          "1.7063768",
          "1.7074278",
          "1.708447",
          "1.7094353",
          "1.7103937",
          "1.711323",
          "1.7122241",
          "1.7130979",
          "1.7139451",
          "1.7147667",
          "1.7155633",
          "1.7163356",
          "1.7170845",
          "1.7178106",
          "1.7185146",
          "1.7191972",
          "1.719859",
          "1.7205006",
          "1.7211227",
          "1.7217259",
          "1.7223106",
          "1.7228775",
          "1.7234272",
          "1.72396",
          "1.7244766",
          "1.7249775",
          "1.725463",
          "1.7259337",
          "1.7263901",
          "1.7268324",
          "1.7272613",
          "1.7276771",
          "1.7280801",
          "1.7284709",
          "1.7288496",
          "1.7292168",
          "1.7295728",
          "1.7299178",
          "1.7302523",
          "1.7305766",
          "1.7308909",
          "1.7311957",
          "1.731491",
          "1.7317774",
          "1.7320549",
          "1.732324",
          "1.7325848",
          "1.7328376",
          "1.7330827",
          "1.7333203",
          "1.7335505",
          "1.7337738",
          "1.7339901",
          "1.7341999",
          "1.7344032",
          "1.7346002",
          "1.7347913",
          "1.7349764",
          "1.7351559",
          "1.7353299",
          "1.7354985",
          "1.735662",
          "1.7358204",
          "1.735974",
          "1.7361229",
          "1.7362672",
          "1.7364071",
          "1.7365426",
          "1.7366741",
          "1.7368014",
          "1.7369249",
          "1.7370446",
          "1.7371606",
          "1.737273",
          "1.737382",
          "1.7374876",
          "1.73759",
          "1.7376893",
          "1.7377855",
          "1.7378787",
          "1.7379691",
          "1.7380567",
          "1.7381416",
          "1.7382239",
          "1.7383037",
          "1.738381",
          "1.7384559",
          "1.7385286",
          "1.738599",
          "1.7386672",
          "1.7387334",
          "1.7387975",
          "1.7388596",
          "1.7389198",
          "1.7389782",
          "1.7390348",
          "1.7390897",
          "1.7391428",
          "1.7391943",
          "1.7392443",
          "1.7392927",
          "1.7393396",
          "1.7393851",
          "1.7394292",
          "1.7394719",
          "1.7395133",
          "1.7395534",
          "1.7395923",
          "1.73963",
          "1.7396666",
          "1.739702",
          "1.7397363",
          "1.7397696",
          "1.7398019",
          "1.7398331",
          "1.7398634",
          "1.7398928",
          "1.7399213",
          "1.7399489",
          "1.7399756",
          "1.7400015",
          "1.7400266",
          "1.740051",
          "1.7400746",
          "1.7400975",
          "1.7401196",
          "1.7401411",
          "1.740162",
          "1.7401821",
          "1.7402017",
          "1.7402207",
          "1.7402391",
          "1.7402569",
          "1.7402741",
          "1.7402909",
          "1.7403071",
          "1.7403228",
          "1.7403381",
          "1.7403528",
          "1.7403672",
          "1.740381",
          "1.7403945",
          "1.7404075",
          "1.7404202",
          "1.7404324",
          "1.7404443",
          "1.7404558",
          "1.7404669",
          "1.7404777",
          "1.7404882",
          "1.7404984",
          "1.7405082",
          "1.7405177",
          "1.740527",
          "1.7405359",
          "1.7405446",
          "1.740553",
          "1.7405612",
          "1.7405691",
          "1.7405768",
          "1.7405842",
          "1.7405914",
          "1.7405984",
          "1.7406051",
          "1.7406117",
          "1.740618",
          "1.7406242",
          "1.7406302",
          "1.740636",
          "1.7406416",
          "1.740647",
          "1.7406523",
          "1.7406574",
          "1.7406623",
          "1.7406671",
          "1.7406718",
          "1.7406763",
          "1.7406806",
          "1.7406849",
          "1.740689",
          "1.740693",
          "1.7406968",
          "1.7407005",
          "1.7407042",
          "1.7407077",
          "1.7407111",
          "1.7407144",
          "1.7407176",
          "1.7407207",
          "1.7407237",
          "1.7407266",
          "1.7407294",
          "1.7407321",
          "1.7407348",
          "1.7407373",
          "1.7407398",
          "1.7407422",
          "1.7407446",
          "1.7407468",
          "1.740749",
          "1.7407512",
          "1.7407532",
          "1.7407552",
          "1.7407572",
          "1.740759",
          "1.7407609",
          "1.7407626",
          "1.7407643",
          "1.740766",
          "1.7407676",
          "1.7407692",
          "1.7407707",
          "1.7407721",
          "1.7407736",
          "1.7407749",
          "1.7407763",
          "1.7407776",
          "1.7407788",
          "1.74078",
          "1.7407812",
          "1.7407823",
          "1.7407834",
          "1.7407845",
          "1.7407855",
          "1.7407865",
          "1.7407875",
          "1.7407885",
          "1.7407894",
          "1.7407903",
          "1.7407911",
          "1.740792",
          "1.7407928",
          "1.7407936",
          "1.7407943",
          "1.740795",
          "1.7407958",
          "1.7407965",
          "1.7407971",
          "1.7407978",
          "1.7407984",
          "1.740799",
          "1.7407996",
          "1.7408002",
          "1.7408007",
          "1.7408013",
          "1.7408018",
          "1.7408023",
          "1.7408028",
          "1.7408033",
          "1.7408037",
          "1.7408042",
          "1.7408046",
          "1.740805",
          "1.7408054",
          "1.7408058",
          "1.7408062",
          "1.7408066",
          "1.7408069",
          "1.7408073",
          "1.7408076",
          "1.7408079",
          "1.7408083",
          "1.7408086",
          "1.7408089",
          "1.7408091",
          "1.7408094",
          "1.7408097",
          "1.74081",
          "1.7408102",
          "1.7408105",
          "1.7408107",
          "1.7408109",
          "1.7408112",
          "1.7408114",
          "1.7408116",
          "1.7408118",
          "1.740812",
          "1.7408122",
          "1.7408124",
          "1.7408125",
          "1.7408127",
          "1.7408129",
          "1.7408131",
          "1.7408132",
          "1.7408134",
          "1.7408135",
          "1.7408137",
          "1.7408138",
          "1.7408139",
          "1.7408141",
          "1.7408142",
          "1.7408143",
          "1.7408144",
          "1.7408146",
          "1.7408147",
          "1.7408148",
          "1.7408149",
          "1.740815",
          "1.7408151",
          "1.7408152",
          "1.7408153",
          "1.7408154",
          "1.7408155",
          "1.7408155",
          "1.7408156",
          "1.7408157",
          "1.7408158",
          "1.7408159",
          "1.7408159",
          "1.740816",
          "1.7408161",
          "1.7408161",
          "1.7408162",
          "1.7408163",
          "1.7408163",
          "1.7408164",
          "1.7408164",
          "1.7408165",
          "1.7408165",
          "1.7408166",
          "1.7408166",
          "1.7408167",
          "1.7408167",
          "1.7408168",
          "1.7408168",
          "1.7408169",
          "1.7408169",
          "1.740817",
          "1.740817",
          "1.740817",
          "1.7408171",
          "1.7408171",
          "1.7408171",
          "1.7408172",
          "1.7408172",
          "1.7408172",
          "1.7408173",
          "1.7408173",
          "1.7408173",
          "1.7408173",
          "1.7408174",
          "1.7408174",
          "1.7408174",
          "1.7408175",
          "1.7408175",
          "1.7408175",
          "1.7408175",
          "1.7408175",
          "1.7408176",
          "1.7408176",
          "1.7408176",
          "1.7408176",
          "1.7408176",
          "1.7408177",
          "1.7408177",
          "1.7408177",
          "1.7408177",
          "1.7408177",
          "1.7408177",
          "1.7408178",
          "1.7408178",
          "1.7408178",
          "1.7408178",
          "1.7408178",
          "1.7408178",
          "1.7408178",
          "1.7408178",
          "1.7408179",
          "1.7408179",
          "1.7408179"
        ],
        "oversample": "4x"
      }
    },
    {
      "id": "dcblock",
      "kind": "iirFilter",
      "options": {
        "feedback": [
          1,
          "-0.99935"
        ],
        "feedforward": [
          "0.999675",
          "-0.999675"
        ]
      }
    },
    {
      "id": "vcf",
      "kind": "dsp",
      "options": {
        "code": "// An OTA cascade, built as the CEM3320 in a Prophet-5 and the IR3109 in a\n// Juno-106 are: four one-pole low-passes in a row, each an operational\n// transconductance amplifier charging a capacitor and a buffer after it, and\n// the last one's output fed back to the first. Being buffered, no stage pulls\n// on the one before it, so the four poles sit together at the cutoff as a\n// transistor ladder's do, and a tap after each is the sound at 6, 12, 18 or 24\n// decibels an octave: Slope is which, and the feedback goes round all four\n// whichever it is, as on the ladder.\n//\n// Four poles at the cutoff are half a cycle round there and take the level\n// down to a quarter, so a feedback of four exactly makes up for them: k is\n// four times Resonance, as on the ladder — below one it rings, at one it is on\n// the edge, above it it sings, at the cutoff the knob names.\n//\n// What the feedback takes, it takes from the bass: below the cutoff the loop\n// is in phase, so the low end falls by 1 + k. Where the sound and the feedback\n// meet, the sound is pushed in harder as Resonance rises, by 1 + k/2, which\n// gives half of that back, so turned from nothing to 0.9 the bass falls by\n// four decibels where the ladder's falls by thirteen: the peak stands out over\n// a low end that stays. The output is half of what the last\n// stage carries, which plays it within a decibel or two of the ladder at the\n// default Resonance and at 0.9, and sings it at the ladder's level.\n//\n// An OTA moves its capacitor by the tanh of the difference between what\n// arrives and what the capacitor holds, so every stage saturates on what it\n// has still to catch up with: a loud or fast sound finds the four slower to\n// move, which is the slew a driven polysynth filter thickens with. The stages\n// see small differences, and their curve is four times as wide as the\n// ladder's; what holds a singing filter at a level is the input stage, the\n// OTA the sound and the feedback meet at, through a curve two and a half times\n// as wide. Four poles come after it, and they take what it bends away from the\n// tone it sings, which is why that tone is round — its third harmonic eight to\n// ten decibels further down than the ladder's — and why it holds its pitch as\n// it swells, where a curve inside every stage drags it flat. Drive is how hard\n// the sound is pushed into the input stage, and stays out of the feedback, so\n// how hard the filter is driven does not move the point at which it starts to\n// sing.\n//\n// Solved with no sample's delay round the loop, as filter-sem's is: the\n// integrators are trapezoidal and the chain, feedback and all, is worked out\n// for this sample's own values, so the cutoff lands where the knob says at any\n// height without running at twice the rate. Each curve is taken as the\n// straight line from nothing to where it stands when the chain is first worked\n// out with no curves at all, and the chain is worked out once more through\n// those lines. Every divisor in it is one plus things that cannot be negative,\n// so there is always an answer.\n//\n// Every curve here is the same either side of nothing, and still the filter\n// leaves a sawtooth off centre. A curve like that keeps a wave centred only\n// while the wave spends as long at each height as at the same depth below,\n// which a sawtooth does going in and no longer does once the poles have moved\n// its harmonics against each other, and which a narrow pulse never does. The\n// lean grows with the square of the level, and every voice of a chord leans\n// the same way, so a chord adds it up. So the output leaves through a one-pole\n// at 5 Hz, as the analog oscillator's does, which takes the lean off below\n// any note and leaves what is played as it was.\nimport { AtmoProcessor, Rng } from \"atmosynth:dsp\";\n\nfunction clamp(value, low, high) {\n  return value < low ? low : value > high ? high : value;\n}\n\n// The ladder's tanh, near enough: x(27 + x²) / (27 + 9x²), arriving at one at\n// three with no slope left. As the slope of the straight line from nothing to\n// where the curve is at `value`: one at nothing and less further out, written\n// so it divides only by what is past three. It is arithmetic and nothing\n// else, so the plugin works it out to the same double.\nfunction slope(value) {\n  const size = value < 0 ? -value : value;\n  return size > 3 ? 1 / size : (27 + size * size) / (27 + 9 * size * size);\n}\n\n// How wide the input stage's curve is beside the ladder's, and each pole's.\nconst INPUT = 2.5;\nconst STAGE = 4;\n\nexport default class AtmosynthOta extends AtmoProcessor {\n  static spec = 1;\n  // Channel 0 of what arrives: a mono source arrives on both sides, and a\n  // stereo one is heard by its left.\n  static inputs = [2];\n  static outputs = [1];\n  // Not smoothed here: a knob's move reaches these already eased, and what is\n  // wired in is followed exactly.\n  static params = {\n    frequency: { min: 20, max: 20000, default: 1200, rate: \"a\", smooth: 0 },\n    // Eight octaves either way, as on the ladder, so an envelope into the\n    // cutoff from a low setting can open the filter the whole way.\n    detune: { min: -9600, max: 9600, default: 0, rate: \"a\", smooth: 0 },\n    resonance: { min: 0, max: 1.2, default: 0.4, rate: \"a\", smooth: 0 },\n    // Into the input stage's curve, and only there.\n    drive: { min: 0.1, max: 10, default: 1, rate: \"a\", smooth: 0 },\n    // Which pole the output is taken after, by the Slope choice's position:\n    // 24, 18, 12 and 6 decibels an octave are the fourth, third, second and\n    // first. Rounded, since a choice turned by a controller glides between\n    // positions on its way to one.\n    slope: { min: 0, max: 3, default: 0, rate: \"k\", smooth: 0 },\n  };\n\n  constructor() {\n    super();\n    // The four poles' integrators, first to last.\n    this.s1 = 0;\n    this.s2 = 0;\n    this.s3 = 0;\n    this.s4 = 0;\n    // Where the chain stands this sample, as `solve` leaves it: what the\n    // input stage hands the first pole, and each pole.\n    this.u = 0;\n    this.y1 = 0;\n    this.y2 = 0;\n    this.y3 = 0;\n    this.y4 = 0;\n    // The cutoff and detune the coefficient below was last worked out for:\n    // not yet any, which no value equals.\n    this.frequency = 0 / 0;\n    this.detune = 0 / 0;\n    this.coefficient = 0;\n    /** The 5 Hz one-pole on the way out, and the two samples it remembers. */\n    this.pole = 1 - (2 * Math.PI * 5) / sampleRate;\n    this.lastRaw = 0;\n    this.centred = 0;\n    // The dither below, drawn from the node's own generator.\n    this.rng = new Rng(this.seed);\n  }\n\n  // The chain worked out for this sample, each curve taken as a straight line\n  // of the slope given: c0 the input stage's, c1 to c4 the poles'. Each pole\n  // is a share of what arrives plus what it holds, so the last is a share of\n  // what the input stage hands on plus what the four hold, and the feedback\n  // from it is folded into that.\n  solve(g, k, x, c0, c1, c2, c3, c4) {\n    const g1 = g * c1;\n    const g2 = g * c2;\n    const g3 = g * c3;\n    const g4 = g * c4;\n    const a1 = g1 / (1 + g1);\n    const a2 = g2 / (1 + g2);\n    const a3 = g3 / (1 + g3);\n    const a4 = g4 / (1 + g4);\n    const b1 = this.s1 / (1 + g1);\n    const b2 = this.s2 / (1 + g2);\n    const b3 = this.s3 / (1 + g3);\n    const b4 = this.s4 / (1 + g4);\n    // The last pole as a share of the input stage's output, plus what the\n    // chain holds.\n    const share = a1 * a2 * a3 * a4;\n    const held = ((b1 * a2 + b2) * a3 + b3) * a4 + b4;\n    const u = (c0 * (x - k * held)) / (1 + c0 * k * share);\n    this.u = u;\n    this.y1 = a1 * u + b1;\n    this.y2 = a2 * this.y1 + b2;\n    this.y3 = a3 * this.y2 + b3;\n    this.y4 = a4 * this.y3 + b4;\n  }\n\n  process(inputs, outputs, parameters) {\n    const channel = outputs[0][0];\n    const source = inputs[0][0];\n    // In a browser's audio thread `sampleRate` is an accessor on the global\n    // scope rather than a variable, so it is read once a call.\n    const contextRate = sampleRate;\n    const ceiling = contextRate * 0.45;\n    const tap = clamp(Math.round(parameters.slope[0]), 0, 3);\n    const pole = this.pole;\n    let lastRaw = this.lastRaw;\n    let centred = this.centred;\n\n    for (let index = 0; index < channel.length; index += 1) {\n      const frequency = parameters.frequency[index];\n      const detune = parameters.detune[index];\n      // A Math.pow and a Math.tan, worked out again only when they would come\n      // out different.\n      if (frequency !== this.frequency || detune !== this.detune) {\n        this.frequency = frequency;\n        this.detune = detune;\n        const hz = clamp(frequency * Math.pow(2, detune / 1200), 20, ceiling);\n        // The integrators' gain, prewarped so the cutoff lands where the knob\n        // says rather than flat of it.\n        this.coefficient = Math.tan((Math.PI * hz) / contextRate);\n      }\n      const g = this.coefficient;\n      const k = 4 * parameters.resonance[index];\n\n      // The sound, pushed in harder as Resonance rises to give back half the\n      // bass the feedback takes, and what starts it singing, as on the\n      // ladder: a millionth of full scale of noise, a hundred and twenty\n      // decibels down, which a filter handed digital silence would otherwise\n      // never have.\n      const x =\n        (1 + 0.5 * k) * parameters.drive[index] * source[index] +\n        1e-6 * this.rng.bipolar();\n\n      // The chain with every curve a straight line, then each curve as the\n      // line to where it stands there, and the chain again.\n      this.solve(g, k, x, 1, 1, 1, 1, 1);\n      this.solve(\n        g,\n        k,\n        x,\n        slope((x - k * this.y4) / INPUT),\n        slope((this.u - this.y1) / STAGE),\n        slope((this.y1 - this.y2) / STAGE),\n        slope((this.y2 - this.y3) / STAGE),\n        slope((this.y3 - this.y4) / STAGE),\n      );\n      this.s1 = 2 * this.y1 - this.s1;\n      this.s2 = 2 * this.y2 - this.s2;\n      this.s3 = 2 * this.y3 - this.s3;\n      this.s4 = 2 * this.y4 - this.s4;\n\n      // What its curves leave off centre, taken off under 5 Hz.\n      const raw = 0.5 * (tap === 0 ? this.y4 : tap === 1 ? this.y3 : tap === 2 ? this.y2 : this.y1);\n      centred = raw - lastRaw + pole * centred;\n      lastRaw = raw;\n      channel[index] = centred;\n    }\n\n    this.lastRaw = lastRaw;\n    this.centred = centred;\n    return true;\n  }\n}\n"
      }
    },
    {
      "id": "track",
      "kind": "gain",
      "options": {}
    },
    {
      "id": "gate",
      "kind": "constantSource",
      "options": {}
    },
    {
      "id": "fenv",
      "kind": "dsp",
      "options": {
        "code": "// The contour of an analog synthesizer: delay, attack, hold, decay, sustain\n// and release, each stage a capacitor charging or discharging rather than a\n// straight line, and a loop that goes back round the first four for as long\n// as the key is held. The vocabulary's own envelope is breakpoints laid down\n// in advance, at the moment a key goes down, by the clock: it can draw a\n// straight line or a ratio and nothing else, and it cannot decide anything\n// by where the shape has got to. An attack that charges from wherever it is\n// until it reaches one, and a loop that comes round again for as long as a\n// hand stays on a key nobody can see the end of, are both decisions of that\n// kind, made a sample at a time.\n//\n// **The attack** charges towards 1.3 and is stopped at one: an RC charge cut\n// off before it flattens, fast off the mark and still moving when it arrives,\n// which is the snap of a hardware envelope that a straight line lacks. Its\n// knob is the time from nothing to one, so from wherever a retrigger caught\n// it, it arrives sooner.\n//\n// **The decay and the release** fall towards their target and a thousandth\n// past it — sixty decibels down — and are stopped on it, so each arrives in\n// a time the knob says rather than approaching for ever. That time is the\n// whole of a fall from one to nothing: the knob sets how fast the capacitor\n// discharges, as an analog envelope's does, so a decay to a sustain of a half,\n// or a release from below full, takes less. A release starts from wherever the\n// key let go of the shape, mid-attack included.\n//\n// **Delay** waits before the attack and **Hold** stays at one after it, both\n// counted in samples. **Loop**, while the key is down, takes the decay back\n// round to the delay and the attack rather than resting at the sustain, so a\n// held key is a slow wave of the contour's own shape; let go, it releases from\n// wherever it was.\n//\n// **The gate** is a level that is one while the key is held, which the module\n// makes from an automation on a constant: the one way a module is told a key\n// went down and came back up. Its last point is the release's time, so the\n// voice is held open for as long as the release lasts and no longer. **What\n// comes out** is the contour times `1 − amount + amount × velocity`, where\n// `velocity` is how hard the key was struck, from nothing to one, and `amount`\n// the Velocity knob; and beside it the same less one, for a gain whose own\n// gain is one to be opened by exactly the contour, from nothing.\n//\n// Every coefficient is worked out again only when the knob it depends on\n// moves, and `sampleRate` is read once a block.\n//\n// Written again in DSP JS, it computes every sample the number it did: a knob\n// not yet seen is held as `0 / 0`, which no reading of it equals, and each\n// output is the one channel the browser gave it.\nimport { AtmoProcessor } from \"atmosynth:dsp\";\n\n/** How far past one the attack aims, as a share of its swing. */\nconst OVERSHOOT = 0.3;\n/** How far past its target a fall aims, and so how close it comes before it is there. */\nconst SETTLE = 0.001;\n/** How many time constants a whole swing takes to arrive, rising and falling. */\nconst RISE = Math.log((1 + OVERSHOOT) / OVERSHOOT);\nconst FALL = Math.log((1 + SETTLE) / SETTLE);\n\nconst IDLE = 0;\nconst DELAY = 1;\nconst ATTACK = 2;\nconst HOLD = 3;\nconst DECAY = 4;\nconst SUSTAIN = 5;\nconst RELEASE = 6;\n\n/** What a knob not yet seen is held as, which no reading of it equals. */\nconst UNSEEN = 0 / 0;\n\nexport default class AtmosynthContour extends AtmoProcessor {\n  static spec = 1;\n  static inputs = [];\n  static outputs = [1, 1];\n  // Not smoothed here: a knob's move reaches these already eased, and the\n  // gate and the velocity are followed exactly.\n  static params = {\n    // One while the key is held, from the module's gate.\n    gate: { min: 0, max: 1, default: 0, rate: \"a\", smooth: 0 },\n    // How hard the key was struck, from the module's note input.\n    velocity: { min: 0, max: 1, default: 0, rate: \"a\", smooth: 0 },\n    // The four times, in milliseconds.\n    delay: { min: 0, max: 10000, default: 0, rate: \"k\", smooth: 0 },\n    attack: { min: 0, max: 10000, default: 5, rate: \"k\", smooth: 0 },\n    hold: { min: 0, max: 10000, default: 0, rate: \"k\", smooth: 0 },\n    decay: { min: 0, max: 10000, default: 600, rate: \"k\", smooth: 0 },\n    sustain: { min: 0, max: 1, default: 0.5, rate: \"k\", smooth: 0 },\n    release: { min: 0, max: 10000, default: 400, rate: \"k\", smooth: 0 },\n    // 0 off, 1 on.\n    loop: { min: 0, max: 1, default: 0, rate: \"k\", smooth: 0 },\n    // How much velocity counts, from nothing to everything.\n    amount: { min: 0, max: 1, default: 0, rate: \"k\", smooth: 0 },\n  };\n\n  constructor() {\n    super();\n    this.stage = IDLE;\n    this.level = 0;\n    /** Samples still to wait in a delay or a hold. */\n    this.left = 0;\n    /** Whether the gate was high a sample ago. */\n    this.open = false;\n    /** The knobs each coefficient was last worked out for, and what it came to. */\n    this.delayMs = UNSEEN;\n    this.delaySamples = 0;\n    this.attackMs = UNSEEN;\n    this.attackCoef = 0;\n    this.attackBase = 0;\n    this.holdMs = UNSEEN;\n    this.holdSamples = 0;\n    this.decayMs = UNSEEN;\n    this.sustain = UNSEEN;\n    this.decayCoef = 0;\n    this.decayBase = 0;\n    this.releaseMs = UNSEEN;\n    this.releaseCoef = 0;\n    this.releaseBase = 0;\n  }\n\n  process(inputs, outputs, parameters) {\n    const shape = outputs[0][0];\n    const opening = outputs[1][0];\n    const gate = parameters.gate;\n    const velocity = parameters.velocity;\n    const rate = sampleRate;\n\n    const delay = parameters.delay[0];\n    if (delay !== this.delayMs) {\n      this.delayMs = delay;\n      this.delaySamples = Math.round((delay * rate) / 1000);\n    }\n    const attack = parameters.attack[0];\n    if (attack !== this.attackMs) {\n      this.attackMs = attack;\n      this.attackCoef = Math.exp(-RISE / ((attack * rate) / 1000));\n      this.attackBase = (1 + OVERSHOOT) * (1 - this.attackCoef);\n    }\n    const hold = parameters.hold[0];\n    if (hold !== this.holdMs) {\n      this.holdMs = hold;\n      this.holdSamples = Math.round((hold * rate) / 1000);\n    }\n    const decay = parameters.decay[0];\n    const sustain = parameters.sustain[0];\n    if (decay !== this.decayMs || sustain !== this.sustain) {\n      this.decayMs = decay;\n      this.sustain = sustain;\n      this.decayCoef = Math.exp(-FALL / ((decay * rate) / 1000));\n      this.decayBase = (sustain - SETTLE) * (1 - this.decayCoef);\n    }\n    const release = parameters.release[0];\n    if (release !== this.releaseMs) {\n      this.releaseMs = release;\n      this.releaseCoef = Math.exp(-FALL / ((release * rate) / 1000));\n      this.releaseBase = -SETTLE * (1 - this.releaseCoef);\n    }\n    const looping = parameters.loop[0] >= 0.5;\n    const amount = parameters.amount[0];\n    const kept = 1 - amount;\n\n    let stage = this.stage;\n    let level = this.level;\n    let left = this.left;\n    for (let index = 0; index < shape.length; index += 1) {\n      // A key down starts the delay from wherever the shape is; a key up\n      // releases it from there.\n      const high = gate[index] >= 0.5;\n      if (high !== this.open) {\n        this.open = high;\n        if (high) {\n          stage = DELAY;\n          left = this.delaySamples;\n        } else if (stage !== IDLE) {\n          stage = RELEASE;\n        }\n      }\n\n      // A stage that ends hands this same sample to the one after it, so a\n      // delay or a hold of nothing costs nothing.\n      if (stage === DELAY) {\n        if (left > 0) left -= 1;\n        else stage = ATTACK;\n      }\n      if (stage === ATTACK) {\n        level = this.attackBase + level * this.attackCoef;\n        if (level >= 1) {\n          level = 1;\n          stage = HOLD;\n          left = this.holdSamples;\n        }\n      } else if (stage === HOLD) {\n        if (left > 0) left -= 1;\n        else stage = DECAY;\n      }\n      if (stage === DECAY) {\n        level = this.decayBase + level * this.decayCoef;\n        if (level <= sustain) {\n          level = sustain;\n          stage = looping ? DELAY : SUSTAIN;\n          left = this.delaySamples;\n        }\n      } else if (stage === SUSTAIN) {\n        level = sustain;\n        if (looping) {\n          stage = DELAY;\n          left = this.delaySamples;\n        }\n      } else if (stage === RELEASE) {\n        level = this.releaseBase + level * this.releaseCoef;\n        if (level <= 0) {\n          level = 0;\n          stage = IDLE;\n        }\n      }\n\n      const value = level * (kept + amount * velocity[index]);\n      shape[index] = value;\n      opening[index] = value - 1;\n    }\n    this.stage = stage;\n    this.level = level;\n    this.left = left;\n    return true;\n  }\n}\n"
      }
    },
    {
      "id": "fdepth",
      "kind": "gain",
      "options": {}
    },
    {
      "id": "fenvAmountset",
      "kind": "waveShaper",
      "options": {
        "curve": [
          "-0.7",
          "0.7"
        ]
      }
    },
    {
      "id": "vca",
      "kind": "gain",
      "options": {}
    },
    {
      "id": "level",
      "kind": "gain",
      "options": {}
    },
    {
      "id": "out",
      "kind": "moduleOutput",
      "options": {
        "output": "out"
      }
    }
  ],
  "connections": [
    {
      "from": {
        "node": "one",
        "output": 0
      },
      "to": {
        "node": "sumset",
        "input": 0
      }
    },
    {
      "from": {
        "node": "sumset",
        "output": 0
      },
      "to": {
        "node": "sum",
        "param": "gain"
      }
    },
    {
      "from": {
        "node": "note",
        "output": 0
      },
      "to": {
        "node": "osc1",
        "param": "frequency"
      }
    },
    {
      "from": {
        "node": "osc1",
        "output": 0
      },
      "to": {
        "node": "sum",
        "input": 0
      }
    },
    {
      "from": {
        "node": "one",
        "output": 0
      },
      "to": {
        "node": "osc1Waveset",
        "input": 0
      }
    },
    {
      "from": {
        "node": "osc1Waveset",
        "output": 0
      },
      "to": {
        "node": "osc1",
        "param": "wave"
      }
    },
    {
      "from": {
        "node": "one",
        "output": 0
      },
      "to": {
        "node": "osc1Phaseset",
        "input": 0
      }
    },
    {
      "from": {
        "node": "osc1Phaseset",
        "output": 0
      },
      "to": {
        "node": "osc1",
        "param": "phase"
      }
    },
    {
      "from": {
        "node": "note",
        "output": 0
      },
      "to": {
        "node": "osc2",
        "param": "frequency"
      }
    },
    {
      "from": {
        "node": "osc2",
        "output": 0
      },
      "to": {
        "node": "osc2level",
        "input": 0
      }
    },
    {
      "from": {
        "node": "osc2level",
        "output": 0
      },
      "to": {
        "node": "sum",
        "input": 0
      }
    },
    {
      "from": {
        "node": "one",
        "output": 0
      },
      "to": {
        "node": "osc2Waveset",
        "input": 0
      }
    },
    {
      "from": {
        "node": "osc2Waveset",
        "output": 0
      },
      "to": {
        "node": "osc2",
        "param": "wave"
      }
    },
    {
      "from": {
        "node": "one",
        "output": 0
      },
      "to": {
        "node": "osc2Phaseset",
        "input": 0
      }
    },
    {
      "from": {
        "node": "osc2Phaseset",
        "output": 0
      },
      "to": {
        "node": "osc2",
        "param": "phase"
      }
    },
    {
      "from": {
        "node": "one",
        "output": 0
      },
      "to": {
        "node": "osc2levelGainset",
        "input": 0
      }
    },
    {
      "from": {
        "node": "osc2levelGainset",
        "output": 0
      },
      "to": {
        "node": "osc2level",
        "param": "gain"
      }
    },
    {
      "from": {
        "node": "in",
        "output": 0
      },
      "to": {
        "node": "sum",
        "input": 0
      }
    },
    {
      "from": {
        "node": "sum",
        "output": 0
      },
      "to": {
        "node": "shaper",
        "input": 0
      }
    },
    {
      "from": {
        "node": "shaper",
        "output": 0
      },
      "to": {
        "node": "dcblock",
        "input": 0
      }
    },
    {
      "from": {
        "node": "note",
        "output": 0
      },
      "to": {
        "node": "track",
        "input": 0
      }
    },
    {
      "from": {
        "node": "track",
        "output": 0
      },
      "to": {
        "node": "vcf",
        "param": "frequency"
      }
    },
    {
      "from": {
        "node": "gate",
        "output": 0
      },
      "to": {
        "node": "fenv",
        "param": "gate"
      }
    },
    {
      "from": {
        "node": "vel",
        "output": 0
      },
      "to": {
        "node": "fenv",
        "param": "velocity"
      }
    },
    {
      "from": {
        "node": "fenv",
        "output": 0
      },
      "to": {
        "node": "fdepth",
        "input": 0
      }
    },
    {
      "from": {
        "node": "fdepth",
        "output": 0
      },
      "to": {
        "node": "vcf",
        "param": "detune"
      }
    },
    {
      "from": {
        "node": "one",
        "output": 0
      },
      "to": {
        "node": "fenvAmountset",
        "input": 0
      }
    },
    {
      "from": {
        "node": "fenvAmountset",
        "output": 0
      },
      "to": {
        "node": "fenv",
        "param": "amount"
      }
    },
    {
      "from": {
        "node": "dcblock",
        "output": 0
      },
      "to": {
        "node": "vcf",
        "input": 0
      }
    },
    {
      "from": {
        "node": "vcf",
        "output": 0
      },
      "to": {
        "node": "vca",
        "input": 0
      }
    },
    {
      "from": {
        "node": "vca",
        "output": 0
      },
      "to": {
        "node": "level",
        "input": 0
      }
    },
    {
      "from": {
        "node": "level",
        "output": 0
      },
      "to": {
        "node": "out",
        "input": 0
      }
    }
  ],
  "automation": [
    {
      "id": "amp",
      "label": "Amplitude",
      "target": {
        "node": "vca",
        "param": "gain"
      },
      "breakpoints": [
        {
          "time": 0,
          "value": "0",
          "curve": "step"
        },
        {
          "time": 4,
          "value": "1",
          "curve": "linear"
        },
        {
          "time": 424,
          "value": "0.28",
          "curve": "linear"
        },
        {
          "time": 804,
          "value": "0",
          "curve": "linear"
        }
      ],
      "sustainAt": 2
    },
    {
      "id": "gate",
      "label": "Gate",
      "target": {
        "node": "gate",
        "param": "offset"
      },
      "breakpoints": [
        {
          "time": 0,
          "value": "1",
          "curve": "step"
        },
        {
          "time": 0,
          "value": "0",
          "curve": "step"
        }
      ],
      "sustainAt": 0
    }
  ],
  "parameters": [
    {
      "id": "attack",
      "label": "Attack",
      "range": {
        "min": "0",
        "max": "4000"
      },
      "default": "4",
      "targets": [
        {
          "automation": "amp",
          "breakpoint": 1,
          "field": "time"
        },
        {
          "node": "fenv",
          "param": "attack"
        }
      ]
    },
    {
      "id": "decay",
      "label": "Decay reaches sustain at",
      "range": {
        "min": "0",
        "max": "8000"
      },
      "default": "424",
      "targets": [
        {
          "automation": "amp",
          "breakpoint": 2,
          "field": "time"
        }
      ]
    },
    {
      "id": "sustain",
      "label": "Sustain level",
      "range": {
        "min": "0",
        "max": "1"
      },
      "default": "0.28",
      "targets": [
        {
          "automation": "amp",
          "breakpoint": 2,
          "field": "value"
        }
      ]
    },
    {
      "id": "release",
      "label": "Release ends at",
      "range": {
        "min": "0",
        "max": "12000"
      },
      "default": "804",
      "targets": [
        {
          "automation": "amp",
          "breakpoint": 3,
          "field": "time"
        }
      ]
    },
    {
      "id": "cutoff",
      "label": "Brightness (Hz)",
      "range": {
        "min": "20",
        "max": "20000"
      },
      "default": "900",
      "targets": [
        {
          "node": "vcf",
          "param": "frequency"
        }
      ],
      "scale": "log"
    },
    {
      "id": "emphasis",
      "label": "Emphasis (sings above one)",
      "range": {
        "min": "0",
        "max": "1.2"
      },
      "default": "0.15",
      "targets": [
        {
          "node": "vcf",
          "param": "resonance"
        }
      ]
    },
    {
      "id": "contour",
      "label": "Filter contour (cents)",
      "range": {
        "min": "-9600",
        "max": "9600"
      },
      "default": "2400",
      "targets": [
        {
          "node": "fdepth",
          "param": "gain"
        }
      ]
    },
    {
      "id": "contourDecay",
      "label": "Filter decay (ms for a full fall)",
      "range": {
        "min": "1",
        "max": "10000"
      },
      "default": "600",
      "targets": [
        {
          "node": "fenv",
          "param": "decay"
        }
      ],
      "scale": "log"
    },
    {
      "id": "contourSustain",
      "label": "Filter sustain",
      "range": {
        "min": "0",
        "max": "1"
      },
      "default": "0.1",
      "targets": [
        {
          "node": "fenv",
          "param": "sustain"
        }
      ]
    },
    {
      "id": "drive",
      "label": "Drive",
      "range": {
        "min": "0.1",
        "max": "10"
      },
      "default": "1",
      "targets": [
        {
          "node": "vcf",
          "param": "drive"
        }
      ]
    },
    {
      "id": "level",
      "label": "Level",
      "range": {
        "min": "0",
        "max": "2"
      },
      "default": "1.43",
      "targets": [
        {
          "node": "level",
          "param": "gain"
        }
      ]
    },
    {
      "id": "detune1",
      "label": "Detune 1 (cents)",
      "range": {
        "min": "-1200",
        "max": "1200"
      },
      "default": "0",
      "targets": [
        {
          "node": "osc1",
          "param": "detune"
        }
      ]
    },
    {
      "id": "detune2",
      "label": "Detune 2 (cents)",
      "range": {
        "min": "-1200",
        "max": "1200"
      },
      "default": "1200",
      "targets": [
        {
          "node": "osc2",
          "param": "detune"
        }
      ]
    }
  ],
  "sampleSlots": [],
  "createdAt": "2026-10-14T00:00:00.000Z"
}